The issues of concealing grouting and rough surfaces are effortlessly conquer. Lining paper, if properly utilized, will stretch in excess of and hide the rough patches and the impact can be completed by using a heavy or embossed wallpaper.
This method also applies to walls built of cement blocks. If you are developing with brick or cement block and know that you want to wallpaper specific walls, request your builders to apply the mortar so that you have a wonderful flat surface, rather than raking out the joints. With present walls, the secret is in preparing the raw surface.
These are the resources you are going to require:-
A long table or bench, a trough, sponge or foam paste applicator, scissors, soft brush for smoothing wallpaper on to wall, a ruler, plumb line, razor for cutting.
A paint sealer is applied to dry any moisture from the wall, then a latex primarily based wallpaper liquid size. A well soaked pre-pasted wallpaper lining will be just sufficient to soften the size and bond the lining firmly to the wall so that when wallpaper is pasted in excess of, it won't weaken in any way.
The exact same principle can even be applied if you are papering in excess of rough-caste walls (walls that have been plastered and raked or scrolled upon when wet). If your brick wall has an very rough and raised surface it will have to be plastered over prior to wall-papering.
Right here is how it truly is done:-
1. Prior to begin functioning on an absorbent raw wall, you're initial step is to seal and dimension the wall. Coat it with a paint sealer and depart to dry overnight. Up coming apply a latex based mostly wallpaper liquid dimension this is specifically excellent on absorbent surfaces. This requires about an hour to dry. If time is brief you can apply two coats leaving an hour amongst coats, as an alternative of the over- night sealer.
2. Apply pre-pasted lining paper. Soak it in a trough to soften and roll out to arm's length. Fold above and back half-way, forming pleats to the end of the roll.
three. Holding the leading piece of paper in one particular hand, and pleats in the other, stretch the initial pleat along the wall and flatten out with sponge. Stretch following fold and flatten and so on to the end of the roll.
4. To paper all around a corner, leave 25 mm (one inch) overlap and "butt" the adjacent strip of paper on to it.
5. Repeat soaking and folding method and bring subsequent roll of paper lining overlapping around 6 mm (quarter of an inch) onto the very first. By getting paper on paper you will avoid the joins from edging into the grooves in between bricks.
six. Leave lining paper to dry overnight. As it does so it will tighten and stretch out over grooves and rough patches on the wall surface.
7. Before applying wallpaper, coat once more with the latex based wallpaper liquid size as added insurance that the lining paper has sealed properly and tightened on to the wall
8. The variety of wallpaper utilized is important. It need to be embossed or a heavy organic weave to make sure that the imprint of the style is not misplaced when pasted on.
9. Hang your picked wallpaper vertically in the standard way.
Sit back and admire your masterpiece.
Tidak ada komentar:
Posting Komentar